A joint can look closed and still have a lip you can feel. This setter lets you draw two slabs together and adjust their height separately, so the surface feels even across the seam.
Position three cups on each side of the seam. Once all six sit flat, press the locking levers down and check that the pads have sealed.
Close the gap Turn the textured center knob to draw the slab edges together in small increments. Check the joint width as you go.
Level the edges Use the smaller silver knobs to bring the adjoining faces flush. Lay a straightedge across the joint to check for a high spot.
Will it grip my surface?
Quartz, granite, marble, tile and glass are suitable when the face is smooth, flat and nonporous. Each cup needs a clear circle 125 mm (4.92 in) across to form a seal.
Start with clean panels and pads. Keep oil and solvents off the rubber, position the cups clear of grout lines, and support both panels throughout adjustment.
Working a longer seam
On large panels, space two setters along the same joint. This gives you a second point of adjustment further down the seam, where the edges can still sit apart or at different heights.
Product specifications
Suction cups
6 lever-lock cups, 3 on each side
Cup diameter
125 mm (4.92 in)
Gap travel
0–50 mm (0–1.97 in)
Height travel
0–25 mm (0–0.98 in)
Overall length
Approx. 642–692 mm (25.28–27.24 in)
Materials
Aluminum, stainless steel, ABS and rubber suction pads
Controls
Manual
Package contents
1-piece option
1 × 6-Cup Countertop Seam Setter
1 × User Manual
2-piece option Includes two complete seam setters for working at two points along a joint.