Product Introduction
🛠️ Go from cutting to cleanup with one wheel.
When a job calls for cutting a piece to length and cleaning up the edge, switching accessories can slow you down. The Xondasp Electroplated Cut & Grind Wheel puts a coarse cutting edge and grinding face together with a finer back face for finishing. Use it for jobs such as cutting a metal bracket, dressing a weld, or smoothing a tile edge.
Choose 4-1/2 in, 5 in, or 6 in to match your angle grinder. Each size is sold individually and comes with its matching threaded adapter.
Key Features
- 40-grit edge and front face
Use the edge for cutting and the front face for heavier grinding and material removal.
- 80-grit back face
Use the finer abrasive surface for finishing and sharpening on a compatible setup.
- 🔩 Low-profile threaded adapter
The included adapter supports flush grinding where the grinder and the correct guard allow it. It fits compatible 5/8-11 threaded spindles.
- Vented edge and clearing channels
Openings help dissipate heat and clear debris that can build up when working with softer materials.
- Alloy steel wheel body
The electroplated abrasive surfaces support cutting and grinding on suitable metals, ceramic tile, stone, and masonry.
Product Specifications
| Wheel diameter |
Thickness |
Max. RPM |
4-1/2 in 114.3 mm |
1.2 mm |
15,000 |
5 in 127 mm |
1.2 mm |
12,500 |
6 in 152.4 mm |
1.55 mm |
10,000 |
- Center bore
7/8 in (22.225 mm)
- Grinder spindle thread for the included adapter
5/8-11
- Grit
40 grit on the edge and front face, 80 grit on the back face
- Wheel body and abrasive bond
Alloy steel body with an electroplated abrasive coating
⚠️ Fit and safe use
Choose a diameter and guard approved for your grinder and the job. Check that the wheel’s marked maximum speed is at least the grinder’s rated no-load speed. Disconnect the power before changing the wheel, use the matching adapter, and wear appropriate protection.
Package Contents
- 1 × Electroplated Cut & Grind Wheel in the Selected Diameter
- 1 × Matching 5/8-11 Threaded Adapter with Mounting Hardware
- 1 × User Manual
Choose the size that fits your grinder and get to work with the Xondasp Electroplated Cut & Grind Wheel.