Xondasp Electroplated Cut & Grind Wheel

$30.00 USD
Size

Product Introduction

🛠️ Go from cutting to cleanup with one wheel.

When a job calls for cutting a piece to length and cleaning up the edge, switching accessories can slow you down. The Xondasp Electroplated Cut & Grind Wheel puts a coarse cutting edge and grinding face together with a finer back face for finishing. Use it for jobs such as cutting a metal bracket, dressing a weld, or smoothing a tile edge.

Choose 4-1/2 in, 5 in, or 6 in to match your angle grinder. Each size is sold individually and comes with its matching threaded adapter.

Key Features

  • 40-grit edge and front face
    Use the edge for cutting and the front face for heavier grinding and material removal.
  • 80-grit back face
    Use the finer abrasive surface for finishing and sharpening on a compatible setup.
  • 🔩 Low-profile threaded adapter
    The included adapter supports flush grinding where the grinder and the correct guard allow it. It fits compatible 5/8-11 threaded spindles.
  • Vented edge and clearing channels
    Openings help dissipate heat and clear debris that can build up when working with softer materials.
  • Alloy steel wheel body
    The electroplated abrasive surfaces support cutting and grinding on suitable metals, ceramic tile, stone, and masonry.

Product Specifications

Wheel diameter Thickness Max. RPM
4-1/2 in
114.3 mm
1.2 mm 15,000
5 in
127 mm
1.2 mm 12,500
6 in
152.4 mm
1.55 mm 10,000
  • Center bore
    7/8 in (22.225 mm)
  • Grinder spindle thread for the included adapter
    5/8-11
  • Grit
    40 grit on the edge and front face, 80 grit on the back face
  • Wheel body and abrasive bond
    Alloy steel body with an electroplated abrasive coating

⚠️ Fit and safe use
Choose a diameter and guard approved for your grinder and the job. Check that the wheel’s marked maximum speed is at least the grinder’s rated no-load speed. Disconnect the power before changing the wheel, use the matching adapter, and wear appropriate protection.

Package Contents

  • 1 × Electroplated Cut & Grind Wheel in the Selected Diameter
  • 1 × Matching 5/8-11 Threaded Adapter with Mounting Hardware
  • 1 × User Manual

Choose the size that fits your grinder and get to work with the Xondasp Electroplated Cut & Grind Wheel.